电力标志桩钢模具中的泥料凝结后,应迅速脱模,不要长时间放置在电力标志桩钢模具上,容易使水分被挤入电力标志桩钢模具表面,产生鼓泡。电力标志桩钢模具使用完毕后,应涂上一层脱模剂进行保养,电力标志桩钢模具使用一段时间后,表面受到了一定的损伤,这时,电力标志桩钢模具表面就容易出现一些石膏粉的残留粘附在电力标志桩钢模具表面,影响生产的标志桩的表面光滑度,遇到这种情 况,不要用硬物刮拭,要用滚烫的开水冲洗,很容易就冲掉了,把电力标志桩钢模具冲洗干净并晾干后,涂上一层脱模剂,保养一段时间,情况能略好转一些。
After the sludge in the steel mould of the electric power sign pile solidifies, it should be demoulded quickly. It should not be placed on the steel mould of the electric power sign pile for a long time. It is easy for water to be squeezed into the surface of the steel mould of the electric power sign pile, resulting in bubbles. After the steel mould of the power sign pile is used, a layer of release agent should be coated to maintain it. After the steel mould of the power sign pile is used for a period of time, the surface of the steel mould of the power sign pile suffers certain damage. At this time, the surface of the steel mould of the power sign pile is prone to some residual gypsum powder adhering to the steel mould surface of the power sign pile, which affects the production of the sign pile. Surface smoothness, in this case, do not scrape with hard objects, but rinse with boiling water. It is easy to wash away. After rinsing and drying the steel mould of the power sign pile, coat it with a stripping agent, and maintain it for a period of time, the situation can be slightly improved.