| 玻璃钢标志桩产品特点 |
| 添加时间：2017/5/23 11:41:32 浏览次数： |
| 玻璃钢标志桩产品特点： Characteristics of the product of glass reinforced plastic: 1、新型复合材料玻璃钢标志桩重量较传统的水泥标志桩轻便了很多，极大方便了运输搬运和安装。 The new composite material of glass reinforced plastic is much lighter than the traditional cement mark, which is very convenient for transporting and installing. 2、传统水泥标志桩都是直接埋设，而新型复合材料玻璃钢标志桩都是下部有“十”字型的钢筋架构，并有水泥固定，然后上层再掩埋，非常稳固。而传统水泥标志桩相对来说容易被雨水等冲刷移动。 2, the traditional cement pile is directly buried, and new type glass fiber reinforced plastic composite logo pile are lower with the "ten" type of steel structure, and cement fixation, and then the upper buried, very solid. Conventional cement posts are relatively easily washed by rain. 3、传统的水泥标志桩都是油漆标志标志桩的文字，一般一两年就需要重新上油漆、喷字，不然就容易出现字迹不清，标志不明的情况，因此每年都要花费大量的人力物力。而新型复合材料玻璃钢标志桩，一般都是采用特种丝印处理，一次性着色固化成型，颜色艳丽，终身不需要去维护。 3, the traditional cement pile are paint mark mark pile of text, usually a year or two will need to spray paint, words, or prone to handwriting is not clear, mark is unknown, so spend a lot of manpower material resources to every year. And new type glass fiber reinforced plastic composite pile, are generally adopts special silk screen processing, one-off colouring curing, colour is gorgeous, life does not need to maintain. 玻璃钢标志桩安装： Glass steel mark pile installation: 底部设有两对穿孔 0.5直径小断钢筋呈十字交叉 灌少量水泥固定 The bottom has two perforation 0.5 diameters and a small amount of cement is fixed in a small amount of cement 玻璃钢标志桩安装步骤： Glass steel mark pile installation step: 1.挖40-60cm深度30-60cm方洞 Dig a 40-60cm deep 30-60cm square hole 2.将两段钢筋插入标石下方对称插孔中呈对称十字交叉 Insert the two bars into the symmetrical intersections of the symmetrical intersections at the bottom of the monument 3.放入标石 3. In the monument |
| 上一页 玻璃钢标志桩的详细介绍 |
| 下一页 没有了 |
Copyright © 技术支持：遨游网络